| Customization: | Available |
|---|---|
| Portable: | Non Portable |
| Form: | Flatbed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IWILDT™ AN-40002000CTX large 3D multi view tomography security inspection system
HIGH ENERGY X-RAY SERIES
X-ray Security Inspection Series
Product Introduction
IWILDT™ AN-40002000CTX large-scale 3D multi view tomography security inspection system is designed for large machinery and equipment goods to carry out X-ray three-dimensional perspective security inspection. The self-propelled chassis is driven by electric hydraulic pump, and three servo electric steering gears are used for direction control. Gantry type three-point support X-ray scanning detection frame structure can reach 5 meters in height and 5 meters in width. The top of the security inspection channel is equipped with a radar ranging sensor to lock the center point of large mechanical equipment goods, automatically control the electric steering gear deflection, and walk around the goods by itself. The X-ray scanning detection frame collects 360 degree perspective data in real time and generates 3D three-dimensional after computer processing Multi view X-ray images;
IWILDT™ AN-40002000CTX large-scale 3D multi view multi view tomography security inspection system X-ray array image detection imaging system has a high-speed image data acquisition circuit up to 0.8m per second. After the data is processed by computer software, the 3D 3D X-ray perspective image of the internal structure details of large mechanical equipment is displayed on the IPS high-definition screen. The security inspection operator can observe the top view scanning map / bottom view scanning map / side scanning map / sectional scanning map / multi angle analysis diagram with naked eyes;
IWILDT™ AN-40002000CTX large 3D multi view tomography security inspection system adopts multi energy 6MeV electron accelerator radiation imaging, the steel plate penetration force can reach 300 mm thick, and can scan 60 large mechanical equipment goods every hour.
IWILDT™ AN-40002000CTX large-scale 3D multi view tomography security inspection system adopts 5gwifi wireless image data and optical fiber image data dual backup transmission. The security inspection operator can remotely carry out CT security scanning for large mechanical equipment goods, which is easy to operate and has strong flexibility. During the scanning process, the staff are far away from the radiation source, and the external infrastructure requirements are low, Can meet the most stringent, international safety inspection standards.
The optional equipment has automatic radioactive material detection (ARD μ), which can simultaneously carry out X-ray inspection and analysis to detect the presence of radioactive gamma and / or neutron materials.
Product Parameters
X-ray Source
Ray energy: 6MeV;
Irradiation direction: side illumination type;
Through steel plate: maximum 300 mm thick steel plate;
Heat dissipation mode: air conditioning ventilation pipe type and oil immersed type;
Ray protection: 10 mm thick lead tank;
Scattering angle: 100 degrees;
Control mode control network code 45;
Collimator: Electric "shutter" device, ultra narrow slit beam;
Detection System
Structural design: modular, removable, secondary handling;
Color coating: yellow;
External dimension: 7.5m (L) x 7.5m (W) x 6.2m (H);
Channel size: 5.0m (W) x 5.0m (H);
Equipment weight: 3000kg;
Detection crystal: YSO;
Photoelectric conversion: CMOS;
Data width: 10 bits;
Number of pixels: 4096pix;
Pixel arrangement: L-shaped line array;
Cascade mode: network port RJ45 communication mode;
Image Processing
Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / LCD display;
Software functions: 3D three-dimensional graphics, edge enhancement and sharpening, image inversion, histogram equalization, storage image retrieval, color / black and white, local increase, super increase, organic matter removal / inorganic matter removal, brightening / darkening, zooming / shrinking, real-time video;
Image format: JPG, named according to scanning time;
License plate recognition: license plate recognition and image classification and archiving;
Data storage: 500000 images as standard;
Image algorithm: 3D reconstruction, system correction algorithm, iterative reconstruction, cone beam artifact correction method, dangerous and dangerous chemicals control products and other CNN neural network recognition algorithms, transmission speed control, energy spectrum imaging algorithm, etc. the software system is upgraded in the console layer, and the running status of the device is monitored in real time through the remote operation and maintenance system;
Equipment Performance
Scanning mode: rotary scanning mode;
Pass rate: 60 goods / hour;
Traveling chassis: hydraulic motor;
Direction control: servo electric actuator;
Tire type: 12.00R20 18pr;
Tire performance: variable pitch design, suitable for various fields;
Chassis performance: good shock absorption and mobility, suitable for outdoor and other complex occasions, with good road capacity;
Equipment weight: 3000kg;
Motor power: 5kW;
Rated pressure: 10MPa;
Rated torque: 9000N;
Walking speed: 10 km / h (adjustable speed);
Data link: 5g WiFi transmission or cable optical fiber communication;
Battery structure: blade type modular structure;
Battery capacity: 195ah;
Endurance: 50km;
Absorbed dose: less than 1usv / time;
Scanning speed: 0.8m/s;
Penetrating force: the outline of 200x200x100mm lead field can be seen after the steel plate with thickness of 300 mm is penetrated;
Spatial resolution: steel wire with diameter less than 1.5mm;
Resolution of penetrating wire: less than 3mm steel wire can be seen behind 300 mm steel plate;
Contrast sensitivity: steel sheet less than 1 mm can be seen behind 300 mm steel plate;
Working site: 50m (length) x 25m (width);
Operating temperature: - 20 ° C to + 43 ° C (- 25 ° C to 50 ° C in option);
Storage temperature: - 10 ° C to + 55 ° C;
Relative humidity: 0 to 95%;
Waterproof grade: IP45;
Power consumption: 5 kW on average;
Monitoring: PTZ camera + voice guidance;
Warning: three color safety light + siren;
Standard: in accordance with who, ICRP 103-2007, China, EU and US regulations;
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.
){kind=link}