Customization: | Available |
---|---|
Warranty: | One Year Free Warranty |
Portable: | Non Portable |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
Iwildt an-48002800hmd multi scan vehicle security inspection system
HIGH ENERGY MOBILE X-RAY SERIES
High energy mobile X-ray security inspection series
Product introduction
Iwildt an-48002800hmd multi scan vehicle security inspection system is specially designed for security inspection of container vehicles at customs, ports, military bases and border ports. It reduces the manual time-consuming and laborious touch safety inspection of trucks, containers and vehicles, scans whether the images such as material, volume and quantity of goods filled in the container are consistent with the checklist through X-ray fluoroscopy, and checks whether there are threats such as terrorists, gunpowder, toxic substances, weapons of mass destruction (WMDs), contraband and dangerous chemicals.
Iwildt an-48002800hmd multi-functional scanning vehicle security inspection system adopts adjustable electron accelerator from 4MeV to 7.5mev and steel plate with penetration force up to 350mm. In the mobile scanning mode, up to 30 vehicles can be checked every hour, and in the through scanning mode, up to 100 vehicles can be scanned every hour.
Iwildt an-48002800hmd multi-function scanning vehicle security inspection system X-ray array image detection and imaging system has a high-speed image data acquisition circuit up to 0.8m per second. After the data is processed by computer software, the different densities and shapes between the goods filled in the container are displayed layer by layer according to the pseudo color gray level. The operator can quickly and reliably check and analyze images through high-resolution IPS LCD.
Iwildt an-48002800hmd multi scan vehicle security inspection system is easy to operate, covers a small area and has low requirements for external infrastructure, which can meet the most stringent international security inspection standards.
The optional equipment includes automatic radioactive material detection (ARD) μ), Be able to conduct X-ray inspection and analysis at the same time to detect radioactivity γ And / or the presence of neutron materials.
Product parameters
Electron induction accelerator
Ray energy: 4 ~ 7.5mev;
Irradiation direction: side illumination type;
Penetration: 350 mm thick steel plate;
Heat dissipation mode: air conditioning ventilation duct type;
Radiation protection: 200mm thick lead tank;
Scattering angle: 80 degrees;
Control mode: h high energy pulse optical fiber output / L low energy pulse optical fiber output;
Collimator: Electric "shutter" device, ultra narrow slit beam output;
detection system
Structural design: Rail mobile gantry structure;
Color coating: Mirror blue gray or military digital fan color;
Appearance dimension: 9m (L) x 2.8m (W) x 5m (H) (excluding track);
Channel size: 5m (W) x 4.8m (H);
Track length: 30m;
Equipment weight: 40 tons;
Detection crystal: BGO;
Photoelectric conversion: SIPM photon counter;
Number of pixels: 2048;
Pixel arrangement: L-shaped line array;
Cascade mode: BNC differential mode communication mode;
image processing
Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / IPS LCD;
Software functions: edge enhancement and sharpening, image inversion, histogram equalization, stored image review, color / black and white, local increase, super increase, organic matter removal / inorganic matter removal, brightening / darkening, zoom in / out, real-time video;
Light and shadow tracking: the color restoration curve is corrected, and the black-and-white pseudo color image is displayed synchronously;
Image recognition: external CNN convolution neural network image workstation computer (optional);
Networking function: 1920x1080 real-time image H.264 coding Ping'an City video function;
Dual energy scanning: the front end asynchronously collects high-energy data and low-energy data, and multi-energy images.;
Material analysis: THz terahertz detection system, Raman detection system and spectral detection system (optional);
Container number identification: container code identification, scanning image watermark superposition;
Box measurement: Volume Measurement and weight data acquisition sensor;
Image format: JPG, BMP and TIFF images are named according to the scanning time;
License plate recognition: license plate recognition and image classification and archiving;
Underbody scanning: 4K high-definition linear array camera for chassis color imaging security scanning;
Data storage: 500000 images as standard;
Data archiving: DVD recorder (standard);
Printer: color printer;
Equipment performance
Function introduction: the gantry track mobile large scanning structure is adopted, and the three tracks are 30 meters long respectively,
8 driving motors are used to provide moving power, and the gantry scanning device is driven reciprocally to carry out security inspection and scanning of container vehicles.
Basic structure: electronic linear accelerator cabinet, scanning drive control cabinet, horizontal detection frame, vertical detection frame, track device, radiation protection facilities, etc;
Inspected vehicle: less than 18m (length) x 2.5m (width) x 4.6m (height);
Scanning height: 4.8m;
Scanning mode: active mobile scanning, prohibited by scanned container vehicles, gantry detection frame moves along the track for security scanning.
Passive scanning, gantry detector is prohibited from moving, the driver drives the scanned container vehicle through the gantry detector security inspection channel, adopts automatic avoidance control technology to scan and image the container part, and the driver cab avoids radiation to reduce the damage of radiation to human body;
Pass rate: actively scan 30 vehicles / hour; 100 vehicles / hour in pass mode;
Radiation index: annual effective radiation dose of operators: ≤ 2msv / year;
Maximum boundary dose rate: ≤ 2.5usv/h;
Scanning speed: active scanning 0.8m/s; 10km / h under fast detection mode;
Penetration / mm: active scanning mode: SP ≥ 350mm (scanning speed 0.8m/s);
Passive scanning mode: SP ≥ 300mm (scanning speed 10km / h);
Wire resolution (in air) / mm:
Active scanning mode: WD ≤ 1.2 (scanning speed 0.8m/s);
Passive scanning mode: WD ≤ 3.0 (scanning speed 10km / h);
Wire resolution (behind steel plate) / mm:
Active scanning mode: WD ≤ 4.0 (scanning speed 0.8m / s);
Passive scanning mode: WD ≤ 5.0 (scanning speed 10km / h);
Contrast sensitivity /%:
Active scanning mode: CS ≤ 1.2 (scanning speed 0.8m / s);
Passive scanning mode: CS ≤ 2.0 (scanning speed 10km / h);
Spatial resolution (pair diameter) / mm:
Active scanning mode: SR ≤ 5.0 mm (line pair diameter) (scanning speed 0.8m / s);
Passive scanning mode: SR ≤ 8.0 mm (behind steel plate) (scanning speed 10km / h);
Material identification function: organic and inorganic substances are classified and identified according to different colors;
Material resolution: mass thickness (g / cm2): 10 ≤ Ti ≤ 140, scanning speed: 0.8m/s;
Graphite thickness mm 10 ≤ Ti ≤ 140 scanning speed: 0.8m/s;
Steel thickness mm 10 ≤ Ti ≤ 140 scanning speed: 0.8m/s;
Image stripping function: peel the background material in the selected area, so as to correctly identify the material properties of the blocked material;
Safety boundary: 40m (L) x 50m (W);
Operating temperature: - 40 ° C to + 50 ° C;
Storage temperature: - 50 ° C to + 55 ° C;
Relative humidity: 0 to 99%;
Waterproof grade: IP45;
Input voltage: AC380V / 50Hz; three-phase five wire system;
Working time: 24-hour continuous operation;
Three prevention measures: windproof operation status, no less than Grade 7 wind;
Outdoor storage status, no less than grade 2 wind;
The rain and snow proof operation state can be operated under the condition of moderate rain and moderate snow;
Outdoor storage can be stored under heavy rain and snow;
Anti dust weather and normal operation;
Protective device: safety interlocking device + radiation dosimeter + video monitoring system + voice broadcasting system;
Warning: three color safety light + siren;
Standards: comply with the regulations of the World Health Organization, ICRP 103-2007, China, the European Union and the United States;
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Abous Us:
Enterprise honor certificate:
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.