| Customization: | Available |
|---|---|
| Portable: | Non Portable |
| Form: | Flatbed |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IWILDT™ AN-28003000 Highway Greentown Inspection System
X-RAY SCAN SERIES
Product Brief
IWILDT™ AN-28003000 High Speed Company's Green Pass Inspection System is in response to the national "Green Passage" Construction Implementation Plan for High Efficiency Fresh Agricultural Products Circulation issued jointly by seven ministries and commissions of the State Council in January 2005, which stipulates that "Vehicles carrying fresh agricultural products legally can be reduced or exempted from tolls". At present, there are some problems such as big error and low efficiency in manual inspection of fresh agricultural products transport vehicles. A set of X-ray fluoroscopy scanned images of material, volume and quantity of goods loaded in trucks and vehicles are generated by AI company to check whether there are any kinds of logistics goods such as green plants that do not conform to the national green document.
X-RAY Features:
IWILDT™ AN-28003000 High Speed Company's Lutong Inspection System uses imported 450 KV radiation source, with penetration of steel plate up to 100 mm. In the pass scanning mode, up to 100 vehicles per hour are scanned for security inspection.
IWILDT™ AN-28003000 high-speed company Greentown inspection system X-ray array image detection and imaging system has a high-speed image data acquisition circuit up to 1 meter per second. After image processing by computer software, the different densities and shapes of cargo loaded in containers are displayed in pseudo-color gray level layers. Operators can quickly and reliably examine and analyze images through high resolution LCD monitors.
IWILDT™ AN-28003000 High Speed Company's Green Pass Inspection System is easy to operate and occupies a small area with low external infrastructure requirements, which can meet the most stringent international security inspection standards.
| Ray source: | Other functions: system log, networking function, one-key shutdown function, network interface remote control function, baggage count, maintenance diagnosis, interlocking function, operator identification program function. |
| Penetration force: 1000mm steel plate; | Equipment performance |
| Tube voltage: 450 KV (adjustable); | Channel size: 3m |
| Tube current: 0.8-1.8 mA (adjustable); | Conveyor belt speed: 0.22m/s; |
| The divergence angle of the beam is 80 degrees. | Film safety: ISO1600 film safety; |
| Heat dissipation mode: oil immersion type. | Line resolution: 0.0787mm diameter single solid copper wire; |
| Radiation protection: 6mm thick lead plate; |
Penetration resolution: 0.127mm diameter single solid copper wire; |
| Scattering angle: 90 degrees; | Spatial resolution: horizontal: 1.0 mm in diameter, vertical: 1.0 mm in diameter; |
| Control mode: RS232 serial communication code control; | Leakage dose: <0.09uGy/h; |
| Collimator: Ultra-narrow slit out beam; | Energy-saving and environmental protection design: Lead curtain is coated with protective film to avoid lead pollution to human body and prolong the service life of equipment; |
| detection system | Operating voltage: 220VAC (+10%) 50+3Hz; |
| Structural design: modular, compact structure; | Diagnostic function: automatic judgment in case of failure, prompt information in time, easy to maintain; |
| Color painting: grey, white and blue; | Detection and alarm: drug explosives and liquid-assisted detection and alarm; some typical drug explosives and liquid appliances and other possible dangerous goods automatic alarm; |
| Detection crystal: GSI; | Unique functions: date and time display, working status, image microdisplay, operator identification code, baggage count, emergency stop, power on self-diagnosis function, network interface, system work and X-ray emission timing; Execution standard: ISO 9001 ISO14001 ISO1600 film safety; Storage temperature/humidity: - 10 ~60 ~20%~95% (without condensation); |
| Photoelectric conversion: CMOS; | Working temperature/humidity: - 10 C-55 C/20%-95% (non-condensation); |
| Pixel Arrangement: L-shaped Line Array; | Noise level: < 74dB; |
| Communication interface: RJ45 communication mode; | Machine size: 5200 (L) * 2200 (W) * 2500 (H) mm; |
| image processing | Weight: 460 kg*approx.460 kg; |
| Multi-energy penetration function, organic matter removal function (1abc), organic matter only display function, image enlargement function (a.z), image inversion function, image integrity function (6pqr), image penetration enhancement function (super-strong), image pullback function, continuous scanning function (7stu), dangerous goods electronic image insertion function (TIP), image recognition training function. | Film safety: ISO1600 film safety; |
| Continuous scanning function: Ultra-thin object detection, providing X-ray continuous scanning function. | Line resolution: 0.0787mm diameter single solid copper wire; |
| Image Preservation: Automatically save all scanned images of inspected items, and store no less than 100,000 images. | Penetration resolution: 0.127mm diameter single solid copper wire; |
| Image retrieval: The device may be able to perform image retrieval according to the combination of image scanning time, operator ID, image preservation mode and other conditions. | Spatial resolution: horizontal: 1.0 mm in diameter, vertical: 1.0 mm in diameter; |
| Standby state: When the equipment is not operating within the set time range, the equipment can automatically enter standby state. | Leakage dose: <0.09uGy/h; |
| Standby Recovery: The device can be manually restored to working state from standby state, and can require input user name and password for verification. Baggage counting function: After the recording equipment is put into use, the checked luggage can not be reset. |
Power loss: 2.0KW (maximum); |
| Operating voltage: 220VAC (+10%) 50+3Hz; | Energy-saving and environmental protection design: Lead curtain is coated with protective film to avoid lead pollution to human body and prolong the service life of equipment; |
| Diagnostic function: automatic judgment in case of failure, prompt information in time, easy to maintain; | Detection and alarm: drug explosives and liquid-assisted detection and alarm; some typical drug explosives and liquid appliances and other possible dangerous goods automatic alarm; |
| Unique functions: date and time display, working status, image microdisplay, operator identification code, baggage count, emergency stop, power on self-diagnosis function, network interface, system work and X-ray emission timing; Execution standard: ISO 9001 ISO14001 ISO1600 film safety; |
Storage temperature/humidity: - 10 ~60 ~20%~95% (without condensation); Appearance size: 2m (L) x 3m (W) x 3.8m (H); |
| Working temperature/humidity: - 10 C-55 C/20%-95% (non-condensation); | Noise level: < 74dB; |
| Machine size: 5200 (L) * 2200 (W) * 2500 (H) mm; | Weight: 460 kg*approx.460 kg; |
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Abous Us:
Enterprise honor certificate:
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.
){kind=link}