Green Channel Detection System Responds National Green Channel Construction Implementation Plan

Product Description

IWILDT™ AN-48002800LKDS intelligent Expressway green channel detection system

 

X-RAY SCAN SERIES

 

Product introduction

 

IWILDT™ AN-48002800LKDS  green channel detection system is a response to the national implementation plan for the construction of "green channel" for the circulation of high-efficiency fresh agricultural products jointly issued by seven ministries and commissions of the State Council in January 2005 in order to promote the circulation of agricultural products and increase farmers' income, which stipulates that "the toll can be reduced or exempted for vehicles with complete vehicles and legally loaded and transported fresh agricultural products". At present, there are some problems such as large error and low efficiency in the manual inspection of fresh agricultural products transportation vehicles. A set of image information such as category, volume and quantity of lvtong goods filled in the truck trunk through dual-mode hybrid scanning by X-ray and visible light array camera independently developed by Wuhan Aiwei company, Check whether there are varieties of logistics goods such as green plants that are inconsistent with the national green communication documents.

 

IWILDT™ AN-48002800LKDS  green channel detection system adopts dual light source radiation imaging and linear CCD camera scanning device, and the penetration force can reach 45mm thick steel plate. In the through scan mode, up to 100 vehicles per hour are scanned for real-time green pass detection.

 

IWILDT™ AN-48002800LKDS  intelligent Expressway green channel detection system X-ray array image detection and imaging system has a high-speed image data acquisition circuit of up to 0.8 meters per second. After the data is processed by computer software image, the freight car is filled with green plants, and the different densities and shapes of goods are displayed layer by layer according to the pseudo color gray level. The operator can quickly and reliably check and analyze images through high-resolution LCD monitor.

 

IWILDT™ AN-48002800LKDS  smart Expressway green channel detection system is easy to operate, covers a small area and has low requirements for external infrastructure, which can meet the green channel inspection standard configuration requirements of domestic high-speed companies.

 

Product parameters

 

Line source

 

Ray energy: 200kV + 160KV + 2048ccd linear array camera;

 

Irradiation direction: side illumination type;

 

Penetrating steel plate: 45mm thick steel plate;

 

Heat dissipation mode: oil immersed;

 

Radiation protection: 6mm thick lead plate shielding box;

 

Scattering angle: 180 degrees;

 

Control mode: RS485 communication code control;

 

Collimator: ultra narrow slit beam.

 

Detection system

 

Structural design: modular split design;

 

Color coating: white baking paint;

 

Appearance dimension: detection frame: 0.8m (L) x   0.6m(W)   x   5m   (H) ;

 

Radiation cabinet: 0.8m (L) x   0.6m(W)   x   3.5m   (H) ;

 

Channel size: 3.5m (W);

 

Equipment weight: 1.6kg;

 

Detection crystal: CSI;

 

Photoelectric conversion: CMOS;

 

Number of pixels: 1920;

 

Pixel arrangement: J-shaped line array;

 

Cascade mode: network port RJ45 communication mode.

 

Image processing

 

Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / LCD;

 

Software functions: edge enhancement and sharpening, image inversion, histogram equalization, stored image review, color / black and white, local increase, super increase, organic matter removal / inorganic matter removal, brightening / darkening, zoom in / out, real-time video;

 

Image format: JPG, images are named according to the scanning time;

 

License plate recognition: classify and archive license plate recognition and image scanning time;

 

Image recognition: automatically identify the names of green plants and vegetables in lvtong directory;

 

Mixed loading identification: pre judge whether mixed loading goods are stored through X-ray penetration data;

 

Data storage: 500000 images as standard;

 

Equipment performance

 

Inspected vehicle: less than 18m (L) x 2.8m (W) x 4.6m (H);

 

Scanning mode: through scanning;

 

Passing rate: 100 vehicles / hour in passing mode;

 

Absorbed dose: less than 1usv / time;

 

Scanning speed: 5km / h; 10km / h under fast inspection mode;

 

Spatial wire resolution: steel wire with diameter less than 1.5mm;

 

Resolution of penetrating wire: steel wire less than 3mm can be seen behind 45mm steel plate;

 

Contrast sensitivity: steel sheet less than 1mm can be seen behind 45mm steel plate;

 

Working site: 2m (L) x 4m (W);

 

Operating temperature: - 20 ºC   to  + 73ºC   (-25ºC   to   50ºC   in   option) ;

 

Storage temperature: - 30 ºC   to  + 75ºC;

 

Relative humidity: up   to   95%;

 

Waterproof grade: IP45;

 

Power consumption: average 5.5 kW;

 

Monitoring: 4 cameras;

 

Warning: three color safety light + siren intelligent voice channel guidance;

 

Standard: comply with the regulations of the World Health Organization, icrp103-2007, China, the European Union and the United States.

 

Why choose Wuhan Aiwei Technology Co., Ltd. ?

^{1.National high-tech enterprises
2.Wuhan famous brand products}
_{3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.}

Abous Us


 

FAQ

Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.

Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.

Q3: What is your leadtime?
A: 3-7 working days after received the payment.

Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.

Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye

Pre-sales technical consulting service:

According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.

After-sales service:

1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier..