| Customization: | Available |
|---|---|
| After-sales Service: | Remote Support |
| Warranty: | 1year |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
Product Introduction
System composition
The IWILDT AI-4720IR portable X-ray inspection instrument mainly consists of an imaging board, an X-ray source, a portable stand (one imaging board and one X-ray source each), a display and control terminal, a radiation meter (designed to be integrated with the X-ray source), a backup battery, and a portable box;
Complies with GB 12664-2003 General Specification for Portable X-ray Safety Inspection Equipment;
Meet the requirements of clauses 5.1, 5.2, 5.3, 5.6, 5.7, and 5.8 in GJB1389A-2005 "System Electromagnetic Compatibility Requirements";
Follow the requirements of A2.2.2 in GJB 150.16A-2009 "Environmental Test Methods for Military Equipment Laboratories Part 16: Vibration Test".
Main tactical indicators
system performance
Control mode ;Equipped with two control modes: wired control and wireless control;
Maximum wired control distance 100m
Maximum wireless control distance 150m
Power supply The imaging board and X-ray source are both powered by mains electricity and batteries;
(System deployment time) 3 minutes(from carrying state to combat use state, wired control)
(System Endurance) 400 images captured (single battery, under conditions of maximum operating intensity of the X-ray source).
X-ray source
Working mode Continuous (dual energy)
weight 6 kg (including battery)
(Penetration) 35mm steel plate (A3 steel)
(Output intensity) 150 kV(adjustable)
(Protection grade) IP52
Imaging board
Weight 5kg (including battery)
Imaging size 430mm×430mm
Spatial resolution 0.050mm diameter copper wire
Imaging board thickness 15mm
Imaging grayscale level 16 bit
Pixel size 150;150 microns
Bottom blind spot height 15mm
Protection grade IP56
Display and control terminal
Weight 1kg
Screen size 12.2 inches
Screen resolution 1920×1200
System memory 16GB
System storage 512GB, supports extended storage cards
Continuous working hours 8 hours
Reinforcement requirements Equipped with anti scratch, anti slip, and anti drop functions
Protection grade IP65
Information transmission : ,wifi,;Equipped with Bluetooth, WiFi, and public wireless transmission functions
Control software : ;Full Chinese display
Imaging form : Multiple post shooting stereoscopic imaging
Image processing system : Equipped with image measurement function, it can estimate the size of the measured object and display it, and can identify detonators;
Status display : Real time display of temperature, electricity, and radiation dose values for imaging boards and X-ray sources;
Portable stand : Status display: With real-time display function of imaging board and X-ray source temperature, electricity, and radiation dose values,the position of the X-ray source and imaging board can be adjusted remotely through the display and control terminal, with a height adjustment range of 200mm and a left and right adjustment range of 200mm. The bracket has no wheels.The X-ray source is placed behind the lifting bracket, and the minimum ground distance from the beam outlet is 18 centimetersAfter placing the imaging board on the lifting bracket, the minimum ground clearance at the bottom of the imaging board is 0 centimeters
Carrying case :Number of carrying boxes for the entire system: The suitcase lever is extendable, with 4 universal wheels at the bottom that can be pulled for carrying : GB/T 17799.1-2017 , B ;Electrostatic discharge disturbance: Conducted anti-interference test according to GB/T 17799.1-2017, with performance reaching level B : GB/T 17799.1-2017 , A ;Radio frequency electromagnetic field radiation disturbance: Conducted anti-interference test according to GB/T 17799.1-2017, with performance reaching Class A : GB/T 17799.1-2017 , B .
Surge (impact) disturbance: Conduct anti-interference test according to GB/T 17799.1-2017, with performance reaching level B.
Transportability : According to the requirements of A2.2.2 in GJB 150.16A-2009 "Environmental Test Methods for Military Equipment Laboratories Part 16: Vibration Testing", the vibration exposure level is shown in Figure C.1, and the vibration exposure duration is 60 minutes per axis.
Environmental adaptability
Operating temperature : -20ºC-+50ºC
Storage temperature : -20ºC-+55ºC
Security
Anti misoperation device : X-ray source with key switch
Security protection function :When the remote control is interrupted for some reason, the X-ray source should be able to automatically shut down; When the radiation leakage at a distance of 50mm on the surface of the X-ray source exceeds the standard, the display and control terminal and the X-ray source have an alarm function
Status display device: When the X-ray source is turned on, it has sound and light indications
Leakage radiation :At a distance of 1 meter from the X-ray radiation window, the air specific release energy rate of leaked radiation is 0.02 milligories per hour; At a distance of 50 millimeters from the surface of the X-ray source, the specific release energy rate of the leaked radiation air is 0.2 mGy per hour.
Stray radiation: When subjected to X-ray radiation, the air specific release energy rate of stray radiation at the working position is 0.6 milligories per hour.
Reliability:Mean time between system failures: 350 hours.All accessories of the equipment are domestically produced
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Abous Us
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.
){kind=link}