Expressway Green Pass Inspection System 3m (W) Channel Size X Ray Detection Body Scanner

Product Description

IWILDT™ AN-28003000 Expressway Green pass inspection system

L ENERGY  X-RAY SERIES

X-ray security inspection series





Product introduction


IWILDT™ AN-28003000 high-speed public record green pass inspection system is aimed at the "green channel" of high-speed fresh agricultural products circulation to check the vehicles that are loaded and transported with fresh agricultural products legally. It solves the problems of large error and low efficiency in manual inspection of fresh agricultural products transportation vehicles. Through X-ray fluoroscopy scanning, the material, volume, quantity and other images of the goods loaded in the truck and vehicle are generated to check whether there are green plants and other logistics goods which are inconsistent with the national green link documents.


IWILDT™ AN-28003000 Expressway Green pass inspection system is an efficient inspection equipment for high-speed "green channel" vehicle cargo inspection. The product has the function of avoiding collision at the front of the vehicle. The radiation imaging technology of the cargo part of the trunk can check the goods in the vehicle without unpacking and unloading, which greatly improves the pass inspection rate of "green channel".


IWILDT™ AN-28003000 Expressway Green pass inspection system adopts high-energy 450kv ray source, and the penetration force can reach 100 mm steel plate. In through scan mode, up to 100 vehicles per hour are scanned for security.


IWILDT™ AN-28003000 Expressway Green pass inspection system has a high-speed image data acquisition circuit up to 1 m / s. After the data is processed by computer software, the different density and shape of the cargo in the container are displayed layer by layer according to the pseudo color gray level. The operator can quickly and reliably check and analyze the image through the high-resolution LCD monitor.


IWILDT™ AN-28003000 Expressway Green pass inspection system is easy to operate and occupies a small area, and has low external infrastructure requirements. It can meet the most stringent international safety inspection standards.


Product parameters

Line source

Ray energy: 450kv;
Irradiation direction: side illumination type;
Through steel plate: 100 mm thick steel plate;
Heat dissipation mode: oil immersed type;
Radiation protection: 60mm thick lead plate shielding box;
Scattering angle: 90 degrees;
Control mode: RS485 communication code control;
Collimator: ultra narrow slit beam;

detection system

Structural design: modular, removable, secondary handling;
Color coating: cold rolled steel box body;
External dimension: 2m (L) x 3m (W) x 3.8m (H);
Channel size: 3M (W);
Equipment weight: 0.6 T;
Detection crystal: cwo5;
Photoelectric conversion: CMOS;
Number of pixels: 1520;
Pixel arrangement: J-shaped line array;
Cascade mode: network port RJ45 communication mode;


image processing

Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / LCD display;
Software functions: edge enhancement and sharpening, image inversion, histogram equalization, storage image retrieval, color / black and white, local increase, super increase, organic matter removal / inorganic matter removal, light / dark reduction, amplification / reduction, real-time video;
Image format: JPG, named according to scanning time;
License plate recognition: license plate recognition and image scanning time classification and archiving;
Data storage: 500000 images as standard;

Equipment performance

Vehicles to be inspected: less than 18m (length) x 2.8m (width) x 4.6m (height);
Scanning mode: through scanning;
Passing rate: 100 vehicles / hour in passing mode;
Absorbed dose: less than 1usv / time;
Scanning speed: 5km / h; 10km / h in fast detection mode;
Spatial resolution: steel wire with diameter less than 1.5mm;
Through wire resolution: steel wire less than 3mm can be seen after 60mm steel plate;
Contrast sensitivity: steel sheet less than 1 mm can be seen after 60 mm steel plate;
Working site: 2m (length) x 4m (width);
Operating temperature: - 20 ° C to + 43 ° C (- 25 ° C to - 50 ° C in option);
Storage temperature: - 30 ° C to + 55 ° C;
Relative humidity: up to 95%;
Waterproof grade: IP45;
Power consumption: average 5.5 kW;
Monitoring: 4 cameras;
Warning: three color safety light + siren intelligent voice channel guidance;
Standard: in accordance with who, ICRP 103-2007, China, EU and US regulations;

Why choose Wuhan Aiwei Technology Co., Ltd. ?

^{1.National high-tech enterprises
2.Wuhan famous brand products}
_{3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.}

Abous Us

 
FAQ

Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.

Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.

Q3: What is your leadtime?
A: 3-7 working days after received the payment.

Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.

Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye

Pre-sales technical consulting service:

According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period,  timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.