| Customization: | Available |
|---|---|
| After-sales Service: | Remote Support |
| Warranty: | Telephone and Video Guidance, Door-to-Door Guidanc |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
IWILDT™ AN-48002800HMS X-ray Security Inspection System for Vehicle Mounted Mobile / Container Vehicles
High Energy Mobile X-ray Security Inspection Series
HIGH ENERGY MOBILE X-RAY SERIES
Product introduction
IWILDT™ AN-48002800HMS X-ray Security Inspection System for Vehicle Mounted Mobile / Container Vehicles is specially designed for the security inspection of container vehicles in customs, ports, military bases and border ports. It reduces the manual time-consuming and laborious touch type safety inspection of trucks, containers and vehicles. Through X-ray fluoroscopy scanning, the images of the material, volume and quantity of the goods in the container are generated to check whether they are consistent with the checklist, and whether there are threats of terrorists, gunpowder, toxic substances, weapons of mass destruction (WMDs), prohibited goods and dangerous chemicals.
IWILDT™ AN-48002800HMS X-ray Security Inspection System for Vehicle Mounted Mobile / Container Vehicles adopts adjustable electron accelerator from 4MeV to 7.5mev, and the penetration force can reach 350mm steel plate. Up to 30 vehicles can be checked per hour in mobile scanning mode, and 100 vehicles per hour in through scan mode.
IWILDT™ AN-48002800HMS X-ray Security Inspection System for Vehicle Mounted Mobile / Container Vehicles X-ray array image detection and imaging system has a high-speed image data acquisition circuit up to 0.8m per second. After the data is processed by computer software, the different density and shape of the cargo in the container are displayed layer by layer according to the pseudo color gray level. The operator can quickly and reliably check and analyze images through high-resolution IPS LCD.
IWILDT™ AN-48002800HMS X-ray Security Inspection System for Vehicle Mounted Mobile / Container Vehicles is easy to operate and occupies a small area, with low external infrastructure requirements, which can meet the most stringent international safety inspection standards.
The optional equipment has automatic radioactive material detection (ARD μ), which can simultaneously carry out X-ray inspection and analysis to detect the presence of radioactive gamma and / or neutron materials.
Product parameters
Electron induction accelerator
Ray energy: 4-7.5mev;
Irradiation direction: side illumination type;
Penetration: 350 mm thick steel plate;
Heat dissipation mode: air conditioning ventilation pipe type and oil immersed type;
Radiation protection: 200 mm thick lead tank;
Scattering angle: 80 degrees;
Control mode: RS422 full duplex communication code control;
Collimator: Electric "shutter" device, ultra narrow slit beam;
Detection System
Structure design: vehicle folding detection frame, hydraulic rotary support driving mode, flexible and flexible;
Color coating: Mirror blue gray or military digital camouflage;
External dimension: 9.60m (L) x 2.8m (W) x 5m (H);
Channel size: 3M (W) x 4.8m (H);
Equipment weight: 27 tons;
Detection crystal: CdWO4;
Photoelectric conversion: CMOS;
Number of pixels: 2048;
Pixel arrangement: L-shaped line array;
Cascade mode: network port RJ45 communication mode;
Image Processing
Image workstation: i7 / 8g / 4tb hard disk / 24 inch 20000:1 / IPS LCD;
Software functions: edge enhancement and sharpening, image inversion, histogram equalization, storage image retrieval, color / black and white, local increase, super increase, organic matter removal / inorganic matter removal, light / dark reduction, amplification / reduction, real-time video;
Light and shadow tracking: color restoration curve correction, black and white pseudo color image synchronous display;
Image recognition: external CNN convolution neural network image workstation computer (optional);
Networking function: 1920x1080 real-time image H.264 encoding safe city video function;
Multi view angle: secondary scanning of overlapping area with 15 degrees deflection angle of detector frame;
Terahertz (THz) detection system was used;
Container number identification: container code recognition, scanning image watermark overlay;
Box measurement: Volume Measurement and weight data acquisition sensor;
Image format: JPG, BMP and TIFF images are named according to scanning time;
License plate recognition: license plate recognition and image classification and archiving;
Data storage: 500000 images as standard;
Data archiving: DVD recorder (standard);
Printer: color printer;
Equipment performance
Function introduction: Dongfeng Tianlong three axis chassis is equipped with rotating support folding arm structure, electronic induction accelerator device and radiation shielding facilities. The scanning detection frame is automatically deployed and moves by itself to carry out fluoroscopy security inspection without unpacking container vehicles;
Basic structure: Dongfeng Tianlong three axis chassis, rotating support folding arm structure, scanning system, operation cabin, radiation protection facilities, etc;
Operation room: A / C socket, refrigerator, radio, natural light, independent storage rack - 4 operators in the cabin;
Minimum crew requirements: 1 image operator / driver and 1 traffic commander;
Vehicles to be inspected: less than 18m (length) x 2.5m (width) x 4.6m (height);
Scanning height: when the vehicle to be inspected is in the same horizontal line at the near ray source side, the scanning height shall not be greater than 0.3m based on the horizontal line;
Working mode: On-board working mode, the staff completes scanning control and image analysis in the vehicle operation room;
In the remote operation mode, the staff completes scanning control and image analysis outside the radiation area;
Scanning mode: active mobile scanning, forbidden by the scanned object, and the scanning system moves along the specified line.
When the driver drives the scanned vehicle through the scanning channel, it is necessary to automatically avoid the driver's cab and complete the image of the goods;
Passing rate: active scanning 30 vehicles / hour; 100 vehicles / hour in passing mode;
Radiation index: annual effective radiation dose of operators: ≤ 2msv / year;
Single scan absorbed dose (on-board operation mode): ≤ 10usv / time;
Single scan absorbed dose (remote operation mode): ≤ 50usv / time;
Maximum boundary dose rate: ≤ 2.5usv/h;
The surrounding dose equivalent rate of the operator's operating position should not be greater than 1.0usv/h;
Scanning speed: active scanning 0.8m/s; fast detection mode can reach 10km / h;
Penetration / mm: active scanning mode: SP ≥ 350mm (scanning speed: 0.8m/s);
Passive scanning mode: SP ≥ 300 mm (scanning speed 10km / h);
Wire resolution (in air) / mm:
Active scanning mode: WD ≤ 1.2 (scanning speed 0.8m/s);
Passive scanning mode: WD ≤ 3.0 (scanning speed 10km / h);
Wire resolution (after steel plate) / mm:
Active scanning mode: WD ≤ 4.0 (scanning speed 0.8m/s);
Passive scanning mode: WD ≤ 5.0 (scanning speed 10km / h);
Contrast sensitivity /%:
Active scanning mode: CS ≤ 1.2 (scanning speed 0.8m/s);
Passive scanning mode: CS ≤ 2.0 (scanning speed 10km / h);
Spatial resolution (line pair diameter) / mm:
Active scanning mode: SR ≤ 5.0 mm line pair diameter) (scanning speed 0.8 m / s);
Passive scanning mode: SR ≤ 8.0 mm (behind steel plate) (scanning speed 10km / h);
Material identification function: organic and inorganic substances are classified and identified according to different colors;
Material resolution: mass thickness (g / cm2): 10 ≤ Ti ≤ 140, scanning speed: 0.8m/s;
Graphite thickness mm 10 ≤ Ti ≤ 140, scanning speed: 0.8m/s;
Steel thickness mm 10 ≤ Ti ≤ 140, scanning speed: 0.8m/s;
Image stripping function: peel off the background material in the selected area, so as to correctly identify the material properties of the occluded material;
Safety boundary: 40m (length) x 50m (width);
Working temperature: - 40 ° C to + 50 ° C;
Storage temperature: - 50 ° C to + 55 ° C;
Relative humidity: 0 to 99%;
Waterproof grade: IP45;
Input voltage: AC380V / 50Hz; three phase five wire system;
Standby power supply: UPS / gasoline generator, can work for 60 hours;
Working time: 24-hour continuous operation;
Operation rate: the annual effective operation rate of the system is more than 98%;
Preparation time: work preparation time < 30 minutes;
Three prevention measures: windproof operation state, no less than Grade 7 wind;
Outdoor storage state, no less than level 2 wind;
The operation state of rain proof and snow proof can be operated under the condition of moderate rain over blue sky and moderate snow;
Outdoor storage state can be stored under heavy rain and heavy snow;
It can operate normally in the weather of anti dust and dust;
Protective device: safety interlock device + radiation dosimeter + video monitoring system + voice broadcasting system;
Warning: three color safety light + siren;
Standard: in accordance with who, ICRP 103-2007, China, EU and US regulations;
Why choose Wuhan Aiwei Technology Co., Ltd. ?
1.National high-tech enterprises
2.Wuhan famous brand products
3..To improve customer service system to provide customers with high quality pre-sale, sale, after-sales service and professional technical support is our mission, and provide the overall solution and the whole process of support services.
Abous Us:
FAQ
Q1: Are you a factory or trading company?
A: We are the biggest professional manufacturer of security equipment with almost 15 years experiences in Shenzhen china.
Q2: What is your MOQ?
A: Normally MOQ 1pcs and the price is negotiable for large quantity.
Q3: What is your leadtime?
A: 3-7 working days after received the payment.
Q4: How does your factory do regarding quality control?
A: We control every production process in accordance with ISO9001, ISO14001, ISO18001 and CE certification, Radiation safety certification of FDA.
Q5: What is your after-sale service?
A: 100% guarantee on our product; install instruction and video support; software debugging with remote control support; The whole unit 2 ye
Pre-sales technical consulting service:
According to the customer needs tailored report, help customers to select products, process plan analysis, sample cutting, function increase and decrease services.
After-sales service:
1. installation and debugging: the supplier shall be responsible for free installation and debugging of equipment on the site of the buyer, and provide free on-site training for operation and maintenance personnel.The theoretical training shall not be less than 1 working day, and the practical operation training shall not be less than 3 working days.
2.technical support: the supplier provides effective technical support, and can optimize the processing procedures and adjust the machine parameters according to the characteristics of processed products.Provide support for the design and application of fixture for processing products.
3. warranty period: after acceptance of the machine, the supplier shall provide 12 months of free warranty, free parts and services within the warranty period, timely and effective service.
4. service time commitment: within 10 hours after the supplier receives the machine tool fault report, the after-sales service personnel will arrive at the site to deal with it.
5.technical support after the warranty period: within 5 years after the warranty period, the supplier shall provide free soft technical consulting services. For example, if the mechanical part of the machine tool fails, the supplier shall provide free soft technical consulting services.
6. supply of spare parts after the expiration of the warranty: after the expiration of the warranty, the supplier can provide the buyer with comprehensive preferential maintenance parts.And repair parts are provided to the buyer at the purchase cost of the supplier.
){kind=link}